Jarheadtop.com HeaderJarheadtop.com Header Back

              
Home Jarheadtop.com
Jim Owens Products
Jim Owens Books & CDs
Jim Owens DVDs
KOWA Scopes
Jim Owens Classes
Jim Owens Links
Jim Owens Articles
Jim Owens FAQ
Jim Owens testimonials


Help a Junior Shooter - Please make a generous Donation to the Camp Perry Retired Marines!

 Bore Tech Products

For three or more items call Jim at 334-347-0020 for batch shipping to save you some money on shipping.

Solvents

 

Sophisticated Solvents That Take the Chore Out Of Bore Cleaning

BORE TECH - BORE TECH MOLY MAGIC

 

Bore Tech Moly Magic

BTCM-15004

MOLY MAGIC 4oz

$13.99 S&H $6.15              PayPal

Bore Tech's MOLY MAGIC is a unique blend of penetrants and surfacants formulated to assist in the removal of molybdenum disulfide build up in rifle bores. Molybdenum disulfide (commonly referred to as "Moly") is a substansive material, which means that it clings to metal surfaces readily, and while this is part of the mechanism, which allows moly to provide friction reduction, it also makes it difficult to remove with trasional bore cleaning solvents.In the presence of high temperatures and high pressures, moly breaks down, causing a thick build up and corrosive sulfiric acid byproduct. Both residues can signifigantly decrease accuracy and destry barrel steel if not appropriately cleaned.

Bore Tech's MOLY MAGIC penetrates deep into the metal's pores while a specially formulated surfacant system that suspends and attracts the particles to the patch with electrostatic force, greatly increasing efficiency. MOLY MAGIC is not a bore cleaner, and should be used in conjunction with a bore cleaner like Bore Tech's ELIMINATOR to achieve proper results. 4oz $13.99

 

UNLOAD FIREARM

1.    Clean bore with Bore Tech’s ELIMINATOR™, following the recommended procedure.

2.    Wet 3 to 4 patches with MOLY MAGIC and push through bore

3.    Next, make 10 to 15 passes with a tight fitting brush saturated with MOLY MAGIC.

4.    Then repeat step 1 and let MOLY MAGIC soak for 10 to 15 minutes.

5.    Finally, push dry patches through the bore until they come out clean.

6.    If necessary, MOLY MAGIC may be left in the bore overnight.  It will not damage the bore.

7.    Before storing firearm, dampen a patch with Bore Tech’s GUN OIL or SHEILD RUST PREVENTATIVE™ and push through bore.

Before using firearm, always run a dry patch through the bore.  This will remove any residue and ensure against obstructions.

 

Jim Owens

WWW.Jarheadtop.com

Top@jarheadtop.com

334-347-0020

My books On Amazon.com “Jim Owens Shooting”

Cleaning Supplies

 










Home | Jim's Products | Jim's Books & CDs | Jim's DVDs | KOWA Scopes | Jim's Classes | Jim's Links | Articles | FAQ | Testimonials  | PayPal Order Page

Created and Maintained by Maria Borneman
copyright 2009 Jim Owens, JAFEICA Publishing, Inc.